Robust ultrasonic wind sensors for challenging environments
- Precision wind measurement
- Robust stainless steel construction
- Models for marine, aviation & hazardous areas
Robust ultrasonic wind sensors for challenging environments
- Precision wind measurement
- Robust stainless steel construction
- Models for marine, aviation & hazardous areas
WindObserver ultrasonic anemometers have a proven record of providing reliable data in critical applications. The product has been selected for use by commercial marine businesses and national navies across the world, as well as being deployed at a range of high volume international airports.
Key Features
- High quality wind measurements up to 65m/s (234 km/h) for normal use
- Models available up to 90m/s (324 km/h) for extreme conditions
- Unheated and heated models to match application and available power
- Robust stainless steel construction for challenging environments
- Intrinsically safe models available (ATEX, IECEx & UKEX certification)
- Comprehensive support includes software and technical advice
Typical Applications
- Wind speed and direction observation
- General purpose marine use (models with Lloyds Register Type Approval)
- Dynamic positioning systems
- Airport weather systems (FAA & CAA approved models)
- Low temperature applications
- Turbine control
- Intrinsically safe applications including offshore rigs
WindObserver technical information
-
FULL RANGE
-
WindObserver 65
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 70
- 0-70 m/s (252 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Approved as part of an AWOS* (FAA & CAA approved)
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 75
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 90
- 0-90 m/s (324 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
WindObserver II
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
- Analogue outputs
WindObserver IS
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- Intrinsically safe. Certified to IECEx, ATEX & UKEX
- Galvanic isolation
- Averaging/gusts to WMO guidelines
- Tested for exposed environments (IP66, BS EN 60945)
*Accepted by the FAA & CAA for the observation and reporting of surface wind as part of a suitable AWOS (Automatic Weather Observing System)
WindObserver robust ultrasonic anemometers (wind sensors) with many approvals - more details
Designed and manufactured by Gill Instruments in the UK, WindObserver ultrasonic anemometers are well proven with over 15 years’ service worldwide over a range of demanding applications.
Quality and high performance measurement is assured across the WindObserver range. WindObserver anemometers have sophisticated error checking and fault reporting built-in. An instrumentation status code is transmitted alongside the measurement outputs to confirm correct operation ensuring confidence in reported data. Calibration (option) traceable to national standards available on all models (except WindObserver IS).
WindObserver anemometers hold many approvals and certifications for critical applications including those required for hazardous areas (including offshore), marine, wind turbine control and airport wind measurement.
Output protocol options for WindObserver include RS422/RS485 full duplex/half duplex for WindObserver 65, 70, 75, 90 and II. WindObserver IS, intrinsically safe anemometer, RS422 & RS232 from power supply and interface. RS422 from anemometer.
Environmental protection to IP66 with robust stainless steel construction across all WindObserver models.
Gill ultrasonic technology provides accurate and reliable wind speed and direction data using solid state technology, with no moving parts, reducing the need for maintenance and making WindObserver ideal for harsh weather environments and remote locations.
-
DOWNLOADS
-
SOFTWARE
-
Wind
Overview
Wind (v1.14-1) is a PC application which can be used to configure Gill wind sensors.Compatible Products
The Wind application is compatible with the following products:- WindSonic (serial numbers 08100001 or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
In addition the Wind application can be used as a terminal emulator to configure the following products:
- WindObserver II, 65, 70, 75, 90, RH
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The Wind application is compatible with the following operating systems:- Windows® 10
- Windows® XP
- Windows® Vista
WindView
Overview
WindView (v1.02-1) is a PC application which can be used to view data collected by Gill wind sensors.Compatible Products
The WindView application is compatible with the following products:- WindSonic (serial numbers 08100001or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
- WindObserver II, 65, 70, 75, 90, RH
In addition the WindView application can be used as a terminal emulator to view data from the following products:
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The WindView application is compatible with the following operating systems:- Windows® 10
- Windows® XP
- Windows® Vista
Additional Applications to support Gill products
Gill have a number of applications to support older products and older operating systems. For more information please contact anemsupport@gillinstruments.com specifying
- Product Name
- Part Number
- Product Serial Number
- PC Operating System
-
CERTIFICATIONS
-
Certifications & approvals
Lloyds Register Type Approved
Certified products:
- WindObserver (all models)
IECEx
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
IECEx Certificate of Conformity SIR 13.0156
IECEx Certificate of Conformity SIR 13.0159
IECEx Certificate of Conformity SIR 15.0013
ATEX & UKEX Approved
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
Sira EU Type Examination Certificate 00ATEX 2217
Sira EU Type Examination Certificate 13ATEX 2384
Sira EU Type Examination Certificate 15ATEX 2014
Sira EU Type Examination Certificate 00ATEX 2218
CSAE UK Type Examination Certificate 21UKEX2364
CSAE UK Type Examination Certificate 21UKEX2363
China Classification Society (CCS)
Certified products:
- WindObserver II
WindObserver 65
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 70
- 0-70 m/s (252 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Approved as part of an AWOS* (FAA & CAA approved)
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 75
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 90
- 0-90 m/s (324 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
WindObserver II
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
- Analogue outputs
WindObserver IS
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- Intrinsically safe. Certified to IECEx, ATEX & UKEX
- Galvanic isolation
- Averaging/gusts to WMO guidelines
- Tested for exposed environments (IP66, BS EN 60945)
*Accepted by the FAA & CAA for the observation and reporting of surface wind as part of a suitable AWOS (Automatic Weather Observing System)
WindObserver robust ultrasonic anemometers (wind sensors) with many approvals - more details
Designed and manufactured by Gill Instruments in the UK, WindObserver ultrasonic anemometers are well proven with over 15 years’ service worldwide over a range of demanding applications.
Quality and high performance measurement is assured across the WindObserver range. WindObserver anemometers have sophisticated error checking and fault reporting built-in. An instrumentation status code is transmitted alongside the measurement outputs to confirm correct operation ensuring confidence in reported data. Calibration (option) traceable to national standards available on all models (except WindObserver IS).
WindObserver anemometers hold many approvals and certifications for critical applications including those required for hazardous areas (including offshore), marine, wind turbine control and airport wind measurement.
Output protocol options for WindObserver include RS422/RS485 full duplex/half duplex for WindObserver 65, 70, 75, 90 and II. WindObserver IS, intrinsically safe anemometer, RS422 & RS232 from power supply and interface. RS422 from anemometer.
Environmental protection to IP66 with robust stainless steel construction across all WindObserver models.
Gill ultrasonic technology provides accurate and reliable wind speed and direction data using solid state technology, with no moving parts, reducing the need for maintenance and making WindObserver ideal for harsh weather environments and remote locations.
WindObserver 65 Manual
WindObserver 70 75 Manual
WindObserver 90 Manual
WindObserver II ManuaI
WindObserver RH Manual
WindObserver IS Manual
Brackets factsheet
Wind
Overview
Wind (v1.14-1) is a PC application which can be used to configure Gill wind sensors.
Compatible Products
The Wind application is compatible with the following products:
- WindSonic (serial numbers 08100001 or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
In addition the Wind application can be used as a terminal emulator to configure the following products:
- WindObserver II, 65, 70, 75, 90, RH
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The Wind application is compatible with the following operating systems:
- Windows® 10
- Windows® XP
- Windows® Vista
WindView
Overview
WindView (v1.02-1) is a PC application which can be used to view data collected by Gill wind sensors.
Compatible Products
The WindView application is compatible with the following products:
- WindSonic (serial numbers 08100001or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
- WindObserver II, 65, 70, 75, 90, RH
In addition the WindView application can be used as a terminal emulator to view data from the following products:
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The WindView application is compatible with the following operating systems:
- Windows® 10
- Windows® XP
- Windows® Vista
Additional Applications to support Gill products
Gill have a number of applications to support older products and older operating systems. For more information please contact anemsupport@gillinstruments.com specifying
- Product Name
- Part Number
- Product Serial Number
- PC Operating System
Certifications & approvals
Lloyds Register Type Approved
Certified products:
- WindObserver (all models)
IECEx
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
IECEx Certificate of Conformity SIR 13.0156
IECEx Certificate of Conformity SIR 13.0159
IECEx Certificate of Conformity SIR 15.0013
ATEX & UKEX Approved
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
Sira EU Type Examination Certificate 00ATEX 2217
Sira EU Type Examination Certificate 13ATEX 2384
Sira EU Type Examination Certificate 15ATEX 2014
Sira EU Type Examination Certificate 00ATEX 2218
CSAE UK Type Examination Certificate 21UKEX2364
CSAE UK Type Examination Certificate 21UKEX2363
China Classification Society (CCS)
Certified products:
- WindObserver II
-
FULL RANGE
-
WindObserver 65
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 70
- 0-70 m/s (252 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Approved as part of an AWOS* (FAA & CAA approved)
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 75
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 90
- 0-90 m/s (324 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
WindObserver II
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
- Analogue outputs
WindObserver IS
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- Intrinsically safe. Certified to IECEx, ATEX & UKEX
- Galvanic isolation
- Averaging/gusts to WMO guidelines
- Tested for exposed environments (IP66, BS EN 60945)
*Accepted by the FAA & CAA for the observation and reporting of surface wind as part of a suitable AWOS (Automatic Weather Observing System)
WindObserver robust ultrasonic anemometers (wind sensors) with many approvals - more details
Designed and manufactured by Gill Instruments in the UK, WindObserver ultrasonic anemometers are well proven with over 15 years’ service worldwide over a range of demanding applications.
Quality and high performance measurement is assured across the WindObserver range. WindObserver anemometers have sophisticated error checking and fault reporting built-in. An instrumentation status code is transmitted alongside the measurement outputs to confirm correct operation ensuring confidence in reported data. Calibration (option) traceable to national standards available on all models (except WindObserver IS).
WindObserver anemometers hold many approvals and certifications for critical applications including those required for hazardous areas (including offshore), marine, wind turbine control and airport wind measurement.
Output protocol options for WindObserver include RS422/RS485 full duplex/half duplex for WindObserver 65, 70, 75, 90 and II. WindObserver IS, intrinsically safe anemometer, RS422 & RS232 from power supply and interface. RS422 from anemometer.
Environmental protection to IP66 with robust stainless steel construction across all WindObserver models.
Gill ultrasonic technology provides accurate and reliable wind speed and direction data using solid state technology, with no moving parts, reducing the need for maintenance and making WindObserver ideal for harsh weather environments and remote locations.
-
DOWNLOADS
-
SOFTWARE
-
Wind
Overview
Wind (v1.14-1) is a PC application which can be used to configure Gill wind sensors.Compatible Products
The Wind application is compatible with the following products:- WindSonic (serial numbers 08100001 or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
In addition the Wind application can be used as a terminal emulator to configure the following products:
- WindObserver II, 65, 70, 75, 90, RH
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The Wind application is compatible with the following operating systems:- Windows® 10
- Windows® XP
- Windows® Vista
WindView
Overview
WindView (v1.02-1) is a PC application which can be used to view data collected by Gill wind sensors.Compatible Products
The WindView application is compatible with the following products:- WindSonic (serial numbers 08100001or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
- WindObserver II, 65, 70, 75, 90, RH
In addition the WindView application can be used as a terminal emulator to view data from the following products:
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The WindView application is compatible with the following operating systems:- Windows® 10
- Windows® XP
- Windows® Vista
Additional Applications to support Gill products
Gill have a number of applications to support older products and older operating systems. For more information please contact anemsupport@gillinstruments.com specifying
- Product Name
- Part Number
- Product Serial Number
- PC Operating System
-
CERTIFICATIONS
-
Certifications & approvals
Lloyds Register Type Approved
Certified products:
- WindObserver (all models)
IECEx
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
IECEx Certificate of Conformity SIR 13.0156
IECEx Certificate of Conformity SIR 13.0159
IECEx Certificate of Conformity SIR 15.0013
ATEX & UKEX Approved
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
Sira EU Type Examination Certificate 00ATEX 2217
Sira EU Type Examination Certificate 13ATEX 2384
Sira EU Type Examination Certificate 15ATEX 2014
Sira EU Type Examination Certificate 00ATEX 2218
CSAE UK Type Examination Certificate 21UKEX2364
CSAE UK Type Examination Certificate 21UKEX2363
China Classification Society (CCS)
Certified products:
- WindObserver II
WindObserver 65
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 70
- 0-70 m/s (252 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Approved as part of an AWOS* (FAA & CAA approved)
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 75
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
WindObserver 90
- 0-90 m/s (324 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing enhanced heating option (-55°C to +70°C)
WindObserver II
- 0-65 m/s (234 km/h) wind speed
- 0-360° wind direction
- IP66 rated stainless steel housing
- Lloyds Register Type Approved
- Anti-icing heating option (-55°C to +70°C)
- Averaging/gusts to WMO guidelines
- Analogue outputs
WindObserver IS
- 0-75 m/s (270 km/h) wind speed
- 0-360° wind direction
- Intrinsically safe. Certified to IECEx, ATEX & UKEX
- Galvanic isolation
- Averaging/gusts to WMO guidelines
- Tested for exposed environments (IP66, BS EN 60945)
*Accepted by the FAA & CAA for the observation and reporting of surface wind as part of a suitable AWOS (Automatic Weather Observing System)
WindObserver robust ultrasonic anemometers (wind sensors) with many approvals - more details
Designed and manufactured by Gill Instruments in the UK, WindObserver ultrasonic anemometers are well proven with over 15 years’ service worldwide over a range of demanding applications.
Quality and high performance measurement is assured across the WindObserver range. WindObserver anemometers have sophisticated error checking and fault reporting built-in. An instrumentation status code is transmitted alongside the measurement outputs to confirm correct operation ensuring confidence in reported data. Calibration (option) traceable to national standards available on all models (except WindObserver IS).
WindObserver anemometers hold many approvals and certifications for critical applications including those required for hazardous areas (including offshore), marine, wind turbine control and airport wind measurement.
Output protocol options for WindObserver include RS422/RS485 full duplex/half duplex for WindObserver 65, 70, 75, 90 and II. WindObserver IS, intrinsically safe anemometer, RS422 & RS232 from power supply and interface. RS422 from anemometer.
Environmental protection to IP66 with robust stainless steel construction across all WindObserver models.
Gill ultrasonic technology provides accurate and reliable wind speed and direction data using solid state technology, with no moving parts, reducing the need for maintenance and making WindObserver ideal for harsh weather environments and remote locations.
WindObserver 65 Manual
WindObserver 70 75 Manual
WindObserver 90 Manual
WindObserver II ManuaI
WindObserver RH Manual
WindObserver IS Manual
Brackets factsheet
Wind
Overview
Wind (v1.14-1) is a PC application which can be used to configure Gill wind sensors.
Compatible Products
The Wind application is compatible with the following products:
- WindSonic (serial numbers 08100001 or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
In addition the Wind application can be used as a terminal emulator to configure the following products:
- WindObserver II, 65, 70, 75, 90, RH
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The Wind application is compatible with the following operating systems:
- Windows® 10
- Windows® XP
- Windows® Vista
WindView
Overview
WindView (v1.02-1) is a PC application which can be used to view data collected by Gill wind sensors.
Compatible Products
The WindView application is compatible with the following products:
- WindSonic (serial numbers 08100001or higher)
- WindMaster
- WindMaster Pro
- WindMaster HS
- WindObserver II, 65, 70, 75, 90, RH
In addition the WindView application can be used as a terminal emulator to view data from the following products:
- R3-50, R3-100
- HS-50, HS-100
Compatible Operating Systems
The WindView application is compatible with the following operating systems:
- Windows® 10
- Windows® XP
- Windows® Vista
Additional Applications to support Gill products
Gill have a number of applications to support older products and older operating systems. For more information please contact anemsupport@gillinstruments.com specifying
- Product Name
- Part Number
- Product Serial Number
- PC Operating System
Certifications & approvals
Lloyds Register Type Approved
Certified products:
- WindObserver (all models)
IECEx
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
IECEx Certificate of Conformity SIR 13.0156
IECEx Certificate of Conformity SIR 13.0159
IECEx Certificate of Conformity SIR 15.0013
ATEX & UKEX Approved
Certified products:
- WindObserver IS
- Mains voltage (AC) power & communications interface (PCI)
- Low voltage (DC) power & communications interface (LVPCI)
Sira EU Type Examination Certificate 00ATEX 2217
Sira EU Type Examination Certificate 13ATEX 2384
Sira EU Type Examination Certificate 15ATEX 2014
Sira EU Type Examination Certificate 00ATEX 2218
CSAE UK Type Examination Certificate 21UKEX2364
CSAE UK Type Examination Certificate 21UKEX2363
China Classification Society (CCS)
Certified products:
- WindObserver II