LEVEL SENSORS

LevelPro

Name: LevelPro
Brand: Gill

The general-purpose capacitive level sensor.

LevelPro is the robust, general-purpose member of the Gill level sensor range. Capacitive sensing means there is no float, no moving part and nothing to jam in the liquid. The fully sealed corrosion-resistant stainless steel body makes it the default choice where the application does not demand a lighter build or a specialist coating.

Request a quote

Download the datasheet

IP66 and IP68+5 to +32 V DC

Continuous level reading

Capacitive, no moving parts

Sealed stainless steel

Corrosion resistant, IP66/IP68

Choice of outputs

0-10 V or 4-20 mA, RS232 for configuration

+5 to +32 V DC

Wide supply range

WHERE IT SITS

LevelPro in the Level sensors range

LevelProCapacitive, no moving partsThe general-purpose capacitive level sensor.

Catch tank level sensor1804-00-020ACO Le Mans approved, for endurance motorsport.View Catch tank level sensor LevelDefendTo customer requirementThe military-grade level sensor, built to requirement.View LevelDefend LevelLiteCapacitive, no moving partsThe lightweight level sensor, for weight-critical platforms.View LevelLite LevelSlickFor conductive liquids that coat, clog or corrode.View LevelSlick Custom level sensorsEngineered around the application when a standard sensor stops short.View custom level sensors

Need a local readout? The DD1615 Level Display is the display accessory for the level sensor range.

SPECIFICATION IN BRIEF

What the LevelPro provides

What it isRobust general-purpose continuous liquid level sensor

SensingCapacitive, no moving parts

BuildCorrosion-resistant stainless steel, fully sealed

OutputsCurrent or voltage (0 to 10 V, 4 to 20 mA), RS232 for configuration

Ingress protectionIP66 and IP68

SPECIFICATION

Full specification

Figures from the LevelPro datasheet, issue 5. Confirm the current issue before ordering.

Measurement

What it is	Robust general-purpose continuous liquid level sensor
Sensing	Capacitive, no moving parts

Outputs and power

Outputs	Current or voltage (0 to 10 V, 4 to 20 mA), RS232 for configuration
Supply voltage	+5 to +32 V DC

Environment

Ingress protection	IP66 and IP68

Mechanical

Materials	Corrosion-resistant stainless steel, fully sealed

Approvals and documentation

Datasheet	LevelPro Iss 5

COMPARE

LevelPro against LevelLite: only what differs

	LevelPro	LevelLite
What it is	Robust general-purpose continuous liquid level sensor	Lightweight continuous level sensor for weight-critical and harsh platforms
Build	Corrosion-resistant stainless steel, fully sealed	Aluminium, sealed electronics
Outputs	Current or voltage (0 to 10 V, 4 to 20 mA), RS232 for configuration	Voltage and current options, RS232 for configuration
Ingress protection	IP66 and IP68	IP68
Datasheet	LevelPro Iss 5	LevelLite Iss 10

Show the 1 rows that are the same

	LevelPro	LevelLite
Sensing	Capacitive, no moving parts	Capacitive, no moving parts

The nearest comparison in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range

ACCESSORIES

LevelPro accessories

The set-up cable and the DD1615 display for LevelPro.

Set-up and configuration

USB to RS232 connection cablePart no. 1484-00-086

Displays

DD1615 level display, blackPart no. 1615-00-039

Calibration options

Additional liquid calibrationSpecify the liquid when ordering
Calibration certificateSpecify when ordering

Order accessories with your sensor or on their own. Quote the part number when you get in touch.

Get expert advice

BEFORE YOU SPECIFY

Is the LevelPro the correct configuration?

Before specifying, confirm:

the measurement or level range the application needs
the output and interface the receiving system expects
the fluid or medium and its effect on the sensing surface
the environmental sealing the installation demands
the mounting arrangement and available space
any approval or certification the application requires

If those match, the LevelPro provides that configuration.

QUESTIONS

Specification questions about the LevelPro

What is the LevelPro used for?

The LevelPro is Gill’s general-purpose liquid level sensor. It gives continuous level measurement of fuel, oil, water and other liquids in vehicles, tanks and industrial equipment.

How does the LevelPro measure level?

The LevelPro measures level capacitively. There are no floats or other moving parts to stick or wear, and the electronics are solid-state and fully sealed.

Which outputs can the LevelPro provide?

The LevelPro is available with a current output (4 to 20 mA) or a voltage output (0 to 10 V). RS232 is used for configuration. The current output needs a 250 Ohm load resistor across the output, and the switch output needs a pull-up resistor of 1 kOhm to 10 kOhm.

What supply voltage does the LevelPro need?

The LevelPro runs from +5 to +32 V DC. One output type uses a +9 to +32 V DC supply, so confirm the option against the datasheet.

Is the LevelPro sealed against water and dust?

Yes. The LevelPro is built in corrosion-resistant stainless steel, fully sealed, and rated to IP66 and IP68.

How do I choose between the LevelPro and the LevelLite?

Choose the LevelPro for a robust stainless steel sensor in general-purpose duty. Choose the LevelLite when weight matters. CAN is available on bespoke sensors.