Contact our team
News
Downloads
Careers
Home › Products › Level sensors › LevelLite

LEVEL SENSORS

LevelLite

The lightweight level sensor, for weight-critical platforms.

LevelLite trades the stainless steel body of LevelPro for aluminium with sealed electronics, which is what makes it the level sensor for weight-critical and harsh platforms. It gives voltage and current outputs as standard, with RS232 for configuration and CAN on bespoke sensors.

Request a quote
Download the datasheet
IP68+5 to +32 V
Gill LevelLite lightweight level sensor

Continuous level reading

Capacitive, no moving parts

Lightweight aluminium

Sealed electronics

Voltage and current outputs

RS232 for configuration, CAN on bespoke sensors

IP68

For weight-critical, harsh platforms

WHERE IT SITS

LevelLite in the Level sensors range

LevelLiteCapacitive, no moving partsThe lightweight level sensor, for weight-critical platforms.
Catch tank level sensor1804-00-020ACO Le Mans approved, for endurance motorsport.View Catch tank level sensorLevelDefendTo customer requirementThe military-grade level sensor, built to requirement.View LevelDefendLevelProCapacitive, no moving partsThe general-purpose capacitive level sensor.View LevelProLevelSlickFor conductive liquids that coat, clog or corrode.View LevelSlickCustom level sensorsEngineered around the application when a standard sensor stops short.View custom level sensors

Need a local readout? The DD1615 Level Display is the display accessory for the level sensor range.

SPECIFICATION IN BRIEF

What the LevelLite provides

What it isLightweight continuous level sensor for weight-critical and harsh platforms
SensingCapacitive, no moving parts
BuildAluminium, sealed electronics
OutputsVoltage and current options, RS232 for configuration
Ingress protectionIP68

SPECIFICATION

Full specification

Figures from the LevelLite datasheet, issue 10. Confirm the current issue before ordering.

Measurement

What it isLightweight continuous level sensor for weight-critical and harsh platforms
SensingCapacitive, no moving parts
Measurement rangeUser-defined, up to around 750 mm

Outputs and power

OutputsVoltage and current options, RS232 for configuration
Supply voltage+5 to +32 V

Environment

Ingress protectionIP68

Mechanical

MaterialsAluminium, sealed electronics

Approvals and documentation

DatasheetLevelLite Iss 10

COMPARE

LevelLite against LevelPro: only what differs

LevelLiteLevelPro
What it isLightweight continuous level sensor for weight-critical and harsh platformsRobust general-purpose continuous liquid level sensor
BuildAluminium, sealed electronicsCorrosion-resistant stainless steel, fully sealed
OutputsVoltage and current options, RS232 for configurationCurrent or voltage (0 to 10 V, 4 to 20 mA), RS232 for configuration
Ingress protectionIP68IP66 and IP68
DatasheetLevelLite Iss 10LevelPro Iss 5
Show the 1 rows that are the same
LevelLiteLevelPro
SensingCapacitive, no moving partsCapacitive, no moving parts

The nearest comparison in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range

ACCESSORIES

LevelLite accessories

Flange and fitting kits, the set-up cable and the DD1615 display for LevelLite.

Mounting

  • Flange kit, 1 holePart no. 4223-10-A
  • Flange kit, 2 holePart no. 4223-10-B
  • Flange kit, 3 holePart no. 4223-10-C
  • Flange kit, 5 holePart no. 4223-10-D
  • Flange kit, threadedPart no. 4223-10-E
  • Fitting kitPart no. 4223-10-099

Set-up and configuration

  • USB to RS232 connection cablePart no. 1484-00-086

Displays

Calibration options

  • Additional liquid calibrationSpecify the liquid when ordering
  • Calibration certificateSpecify when ordering

Order accessories with your sensor or on their own. Quote the part number when you get in touch.

Get expert advice

BEFORE YOU SPECIFY

Is the LevelLite the correct configuration?

Before specifying, confirm:

  • the measurement or level range the application needs
  • the output and interface the receiving system expects
  • the fluid or medium and its effect on the sensing surface
  • the environmental sealing the installation demands
  • the mounting arrangement and available space
  • any approval or certification the application requires

If those match, the LevelLite provides that configuration.

QUESTIONS

Specification questions about the LevelLite

What is the LevelLite used for?

The LevelLite is a lightweight continuous level sensor for weight-critical and harsh platforms, where every gram matters.

How does the LevelLite measure level?

The LevelLite measures level capacitively, with no moving parts. The electronics are sealed inside an aluminium body.

Which outputs can the LevelLite provide?

The LevelLite offers voltage and current outputs. RS232 is used for configuration, and CAN is available on bespoke sensors.

How long can a LevelLite probe be?

The measurement length is user-defined, up to around 750 mm. Give Gill the tank depth and mounting arrangement and the probe is built to suit.

What supply voltage does the LevelLite need?

The LevelLite runs from +5 to +32 V.

Is the LevelLite waterproof?

The LevelLite is rated to IP68.

How do I choose between the LevelLite and the LevelPro?

Choose the LevelLite when weight is critical. Choose the LevelPro for a robust stainless steel sensor in general-purpose duty.

At a glance
SensingCapacitive, no moving parts
BuildAluminium, sealed electronics
Ingress protectionIP68
Supply voltage+5 to +32 V
Request a quoteGet expert advice

Have an application to discuss?

Speak to our team

Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.

Enquiring about LevelLite

  • Our team replies. Not an account manager, and not a queue.
  • We aim to respond in one working day. Monday to Friday.
  • No obligation. Plenty of these end with us saying it is not our product.