NON-CONTACT POSITION SENSOR
Blade Dual Output
Single or dual channel analogue output.
Blade Dual Output is the dual-output member of the Blade range, offering single and dual channel analogue output from the same non-contact two-part design. Dual channel is specified where the receiving system needs a redundant or independently checked position signal.
Single and dual channel
Redundant second channel option
Contactless two-part design
Nothing to wear, unlimited life
Linear or angular
Measures either type of travel
IP67 rated
Sealed for temporary immersion, 1 m for 30 min
WHERE IT SITS
Blade Dual Output in the Blade range
SPECIFICATION IN BRIEF
What the Blade Dual Output provides
SPECIFICATION
Full specification
Figures from the Blade Dual Output datasheet, issue 6. Confirm the current issue before ordering.
Measurement
| Measurement | Linear or angular |
|---|---|
| Sensing | Non-contact, two-part design |
| Measurement range | Linear or angular, non-contact two-part design |
| Channels | Single or dual channel |
Outputs and power
| Outputs | Analogue |
|---|
Environment
| Ingress protection | IP67 |
|---|
Approvals and documentation
| Datasheet | PD1356 Iss 6 |
|---|
COMPARE
Blade Dual Output against Blade25: only what differs
| Blade Dual Output | Blade25 | |
|---|---|---|
| Measurement | Linear or angular | 25 mm linear, or 90 degrees angular |
| Measurement range | Linear or angular, non-contact two-part design | 25 mm linear or 90° angular, fully configurable |
| Outputs | Analogue | Analogue and digital (PWM, RS232, RS485) |
| Datasheet | PD1356 Iss 6 | PD1484 Iss 7 |
Show the 2 rows that are the same
| Blade Dual Output | Blade25 | |
|---|---|---|
| Sensing | Non-contact, two-part design | Non-contact, two-part design |
| Ingress protection | IP67 | IP67 |
The nearest comparison in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range
BEFORE YOU SPECIFY
Is the Blade Dual Output the correct configuration?
Before specifying, confirm:
- the measurement or level range the application needs
- the output and interface the receiving system expects
- the fluid or medium and its effect on the sensing surface
- the environmental sealing the installation demands
- the mounting arrangement and available space
- any approval or certification the application requires
If those match, the Blade Dual Output provides that configuration.
QUESTIONS
Specification questions about the Blade Dual Output
What does the Blade Dual Output measure?
Linear or angular.
What is the difference between the Blade Dual Output and the Blade25?
The Blade Dual Output offers single or dual channel analogue output for a redundant second channel, on linear or angular travel. The Blade25 covers 25 mm linear or 90 degrees angular, is fully configurable and adds PWM, RS232 and RS485 digital outputs.
How does the Blade Dual Output sense?
Non-contact, two-part design.
What measurement range does the Blade Dual Output cover?
The Blade Dual Output covers linear or angular, non-contact two-part design.
What outputs does the Blade Dual Output provide?
The Blade Dual Output provides analogue.
What ingress protection does the Blade Dual Output have?
The Blade Dual Output is sealed to IP67.
Where can I find the datasheet for the Blade Dual Output?
The Blade Dual Output datasheet is PD1356 Iss 6. It is linked in the documentation section of this page.
Have an application to discuss?
Speak to our team
Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.
Enquiring about Blade Dual Output
- Our team replies. Not an account manager, and not a queue.
- We aim to respond in one working day. Monday to Friday.
- No obligation. Just honest advice on whether Gill is the right fit.