2-AXIS ULTRASONIC ANEMOMETER
WindSonic 60
The general-purpose 2-axis wind sensor.
WindSonic 60 is the standard plastic-bodied WindSonic and the starting point of the range. It measures 0 to 60 m/s in a 0.5 kg unit with no moving parts, for general-purpose wind measurement where the environment does not demand a metal body or heating.
No moving parts
Ultrasonic wind measurement
Up to 60 m/s
2% RMSE accuracy at 12 m/s
Configurable outputs
RS232, RS422, RS485, analogue
IP66 rated
0.5 kg, -35 °C to +70 °C
WHERE IT SITS
WindSonic 60 in the WindSonic range
Within the WindSonic family the models differ by measurement range, output rate, build and approvals rather than by measurement principle.
MEASUREMENT
What the WindSonic 60 measures
The WindSonic 60 is a 2-axis ultrasonic anemometer. The WindSonic 60 does not provide heating. That is available on other models in the range.
SPECIFICATION
Full specification
Figures from the WindSonic 60 datasheet, issue 12. Confirm the current issue before ordering.
Measurement
| Wind speed | 0 to 60 m/s (116 knots) |
|---|---|
| Wind direction | 0 to 360 degrees, no dead band |
| Direction range | 0 to 360°, no dead band |
| Accuracy | Wind speed ±2% RMSE at 12 m/s, direction ±2° RMSE at 12 m/s |
| Resolution | 0.01 m/s, starting threshold 0.01 m/s |
Outputs and power
| Outputs | RS232, RS422, RS485 depending on option; analogue 0 to 5 V, 0 to 20 mA or 4 to 20 mA |
|---|---|
| Interface | ASCII and NMEA 0183, baud 2400 to 38400 |
| Supply voltage | 10 to 30 V DC |
Environment
| Operating temperature | -35 °C to +70 °C |
|---|---|
| Ingress protection | IP66 |
| Heating | Unheated |
Mechanical
| Construction | LURAN S KR 2861/1C (ASA/PC), 142 × 163 mm |
|---|---|
| Weight | 0.5 kg |
| Dimensions | 142 × 163 mm |
Approvals and documentation
| Datasheet | 1405-027 Iss 12 |
|---|
COMPARE
WindSonic 60 against WindSonic 75: only what differs
| WindSonic 60 | WindSonic 75 | |
|---|---|---|
| Wind speed | 0 to 60 m/s (116 knots) | 0 to 75 m/s (146 knots) |
| Construction | LURAN S KR 2861/1C (ASA/PC), 142 × 163 mm | LURAN S KR 2861/1C (ASA/PC) |
| Datasheet | 1405-027 Iss 12 | 1405-0035 Iss 9 |
Show the 4 rows that are the same
| WindSonic 60 | WindSonic 75 | |
|---|---|---|
| Wind direction | 0 to 360 degrees, no dead band | 0 to 360 degrees, no dead band |
| Heating | Unheated | Unheated |
| Weight | 0.5 kg | 0.5 kg |
| Operating temperature | -35 °C to +70 °C | -35 °C to +70 °C |
The nearest sibling in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range
ACCESSORIES
Accessories for the WindSonic 60
The parts that fit the WindSonic 60: cable, mounting, set-up kit and spares.
In the box. Every WindSonic ships with its mating connector, so most installations only need cable and a mount.
Cables
- Cable, 3 pair, cut to length
- Cable, 4 pair, cut to length
- Cable, 4 pair, 15 m, pins fitted
Connectors
- Spare connector
Mounting
- Bracket for pole or wall mounting
- Support tube, 0.5 m
Spares
- Reflector assembly, black
- Reflector assembly, white
Order accessories with your sensor or on their own. Quote the part number when you get in touch.
BEFORE YOU SPECIFY
Is the WindSonic 60 the correct configuration?
Before specifying, confirm:
- the wind speed range the site actually sees
- the output rate the receiving system needs
- the operating temperature and whether heating is required
- any approval or certification the installation demands
- the mounting arrangement and cable or connector choice
- the interface and output the receiving system expects
If those match, the WindSonic 60 provides that configuration.
QUESTIONS
Specification questions about the WindSonic 60
What wind speed range does the WindSonic 60 cover?
The WindSonic 60 measures 0 to 60 m/s (116 knots).
What is the difference between the WindSonic 60 and the WindSonic 75?
Wind speed range. The WindSonic 60 measures up to 60 m/s (116 knots), the WindSonic 75 up to 75 m/s (146 knots). Both use the same ASA/PC polymer body.
How accurate is the WindSonic 60?
The WindSonic 60 is specified at wind speed ±2% RMSE at 12 m/s, direction ±2° RMSE at 12 m/s.
What resolution does the WindSonic 60 report?
The WindSonic 60 reports to 0.01 m/s, starting threshold 0.01 m/s.
What outputs does the WindSonic 60 provide?
The WindSonic 60 provides RS232, RS422, RS485 depending on option; analogue 0 to 5 V, 0 to 20 mA or 4 to 20 mA.
What power supply does the WindSonic 60 need?
The WindSonic 60 requires 10 to 30 V DC.
What temperature range does the WindSonic 60 operate over?
The WindSonic 60 operates from -35 °C to +70 °C.
What ingress protection does the WindSonic 60 have?
The WindSonic 60 is sealed to IP66.
Have an application to discuss?
Speak to our team
Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.
Enquiring about WindSonic 60
- Our team replies. Not an account manager, and not a queue.
- We aim to respond in one working day. Monday to Friday.
- No obligation. Just honest advice on whether Gill is the right fit.