2-AXIS ULTRASONIC ANEMOMETER
WindSonic 75
The same sensor, a higher wind speed range.
WindSonic 75 raises the measurement range to 0 to 75 m/s while keeping the ASA/PC body, the 0.5 kg weight and the unheated build of the standard WindSonic. It is the option where the site sees wind speeds above the 60 m/s range but does not need a metal body.
No moving parts
Ultrasonic wind measurement
Up to 75 m/s
2% RMSE accuracy at 12 m/s
Configurable outputs
RS232, RS422, RS485, analogue
IP66 rated
0.5 kg, -35 °C to +70 °C
WHERE IT SITS
WindSonic 75 in the WindSonic range
Within the WindSonic family the models differ by measurement range, output rate, build and approvals rather than by measurement principle.
MEASUREMENT
What the WindSonic 75 measures
The WindSonic 75 is a 2-axis ultrasonic anemometer. The WindSonic 75 does not provide heating. That is available on other models in the range.
SPECIFICATION
Full specification
Figures from the WindSonic 75 datasheet, issue 9. Confirm the current issue before ordering.
Measurement
| Wind speed | 0 to 75 m/s (146 knots) |
|---|---|
| Wind direction | 0 to 360 degrees, no dead band |
| Direction range | 0 to 360°, no dead band |
| Accuracy | Wind speed ±2% RMSE at 12 m/s, direction ±2° RMSE at 12 m/s |
| Resolution | 0.01 m/s, starting threshold 0.01 m/s |
Outputs and power
| Outputs | RS232, RS422, RS485 depending on option; analogue 0 to 5 V, 0 to 20 mA or 4 to 20 mA |
|---|---|
| Interface | ASCII and NMEA 0183, baud 2400 to 38400 |
| Supply voltage | 10 to 30 V DC, or 24 V RMS AC ±10% at 50/60 Hz |
Environment
| Operating temperature | -35 °C to +70 °C |
|---|---|
| Ingress protection | IP66 |
| Heating | Unheated |
Mechanical
| Materials | LURAN S KR 2861/1C (ASA/PC) |
|---|---|
| Weight | 0.5 kg |
Approvals and documentation
| Datasheet | 1405-0035 Iss 9 |
|---|
COMPARE
WindSonic 75 against WindSonic 60: only what differs
| WindSonic 75 | WindSonic 60 | |
|---|---|---|
| Wind speed | 0 to 75 m/s (146 knots) | 0 to 60 m/s (116 knots) |
| Construction | LURAN S KR 2861/1C (ASA/PC) | LURAN S KR 2861/1C (ASA/PC), 142 × 163 mm |
| Datasheet | 1405-0035 Iss 9 | 1405-027 Iss 12 |
Show the 4 rows that are the same
| WindSonic 75 | WindSonic 60 | |
|---|---|---|
| Wind direction | 0 to 360 degrees, no dead band | 0 to 360 degrees, no dead band |
| Heating | Unheated | Unheated |
| Weight | 0.5 kg | 0.5 kg |
| Operating temperature | -35 °C to +70 °C | -35 °C to +70 °C |
The nearest sibling in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range
ACCESSORIES
Accessories for the WindSonic 75
The parts that fit the WindSonic 75: cable, mounting, set-up kit and spares.
In the box. Every WindSonic ships with its mating connector, so most installations only need cable and a mount.
Cables
- Cable, 3 pair, cut to length
- Cable, 4 pair, cut to length
- Cable, 4 pair, 15 m, pins fitted
Connectors
- Spare connector
Mounting
- Bracket for pole or wall mounting
- Support tube, 0.5 m
Spares
- Reflector assembly, black
- Reflector assembly, white
Order accessories with your sensor or on their own. Quote the part number when you get in touch.
BEFORE YOU SPECIFY
Is the WindSonic 75 the correct configuration?
Before specifying, confirm:
- the wind speed range the site actually sees
- the output rate the receiving system needs
- the operating temperature and whether heating is required
- any approval or certification the installation demands
- the mounting arrangement and cable or connector choice
- the interface and output the receiving system expects
If those match, the WindSonic 75 provides that configuration.
QUESTIONS
Specification questions about the WindSonic 75
What wind speed range does the WindSonic 75 cover?
The WindSonic 75 measures 0 to 75 m/s (146 knots).
What is the difference between the WindSonic 75 and the WindSonic 60?
Wind speed range. The WindSonic 75 measures up to 75 m/s (146 knots), the WindSonic 60 up to 60 m/s (116 knots). Both use the same ASA/PC polymer body.
How accurate is the WindSonic 75?
The WindSonic 75 is specified at wind speed ±2% RMSE at 12 m/s, direction ±2° RMSE at 12 m/s.
What resolution does the WindSonic 75 report?
The WindSonic 75 reports to 0.01 m/s, starting threshold 0.01 m/s.
What outputs does the WindSonic 75 provide?
The WindSonic 75 provides RS232, RS422, RS485 depending on option; analogue 0 to 5 V, 0 to 20 mA or 4 to 20 mA.
What power supply does the WindSonic 75 need?
The WindSonic 75 requires 10 to 30 V DC, or 24 V RMS AC ±10% at 50/60 Hz.
What temperature range does the WindSonic 75 operate over?
The WindSonic 75 operates from -35 °C to +70 °C.
What ingress protection does the WindSonic 75 have?
The WindSonic 75 is sealed to IP66.
Have an application to discuss?
Speak to our team
Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.
Enquiring about WindSonic 75
- Our team replies. Not an account manager, and not a queue.
- We aim to respond in one working day. Monday to Friday.
- No obligation. Plenty of these end with us saying it is not our product.