3-AXIS ULTRASONIC ANEMOMETER
WindMaster RA
The right-angled head, for flow along the mounting axis.
WindMaster RA carries a right-angled head rather than the symmetrical head of the standard WindMaster. That changes where the instrument can sit relative to the flow being measured, which matters when the mounting arrangement would otherwise put the structure in the measurement path.
Right-angled head
Fits tight installations
20 Hz output rate
32 Hz option available
RS232 and analogue outputs
12-bit data, 14-bit option
-40 °C to +70 °C
IP65 rated
WHERE IT SITS
WindMaster RA in the WindMaster range
Within the WindMaster family the models differ by measurement range, output rate, build and approvals rather than by measurement principle.
MEASUREMENT
What the WindMaster RA measures
The WindMaster RA is a 3-axis ultrasonic anemometer.
SPECIFICATION
Full specification
Figures from the WindMaster RA datasheet, issue 5. Confirm the current issue before ordering.
Measurement
| Wind speed | 0 to 50 m/s |
|---|---|
| Wind speed range | 0 to 50 m/s, right-angled head |
| Axes | 3-axis, u, v and w |
| Head and build | Right-angled head, aluminium and carbon fibre |
Outputs and power
| Output rate | 20 Hz, 32 Hz option |
|---|---|
| Outputs | 12-bit digital, with a 14-bit digital or analogue output option |
| Interface | RS232 |
Environment
| Operating temperature | -40 °C to +70 °C |
|---|---|
| Ingress protection | IP65 |
Approvals and documentation
| Datasheet | 1590-0011 Iss 5 |
|---|
COMPARE
WindMaster RA against WindMaster Pro: only what differs
| WindMaster RA | WindMaster Pro | |
|---|---|---|
| Output rate | 20 Hz, 32 Hz option | 32 Hz |
| Wind speed | 0 to 50 m/s | 0 to 65 m/s |
| Head and build | Right-angled head, aluminium and carbon fibre | Stainless steel |
| Datasheet | 1590-0011 Iss 5 | WindMaster_Pro Iss 8 |
Show the 1 rows that are the same
| WindMaster RA | WindMaster Pro | |
|---|---|---|
| Axes | 3-axis, u, v and w | 3-axis, u, v and w |
The nearest sibling in the range. Confirm which specification the application actually needs before ordering either. Compare the whole range
BEFORE YOU SPECIFY
Is the WindMaster RA the correct configuration?
Before specifying, confirm:
- the wind speed range the site actually sees
- the output rate the receiving system needs
- the operating temperature and whether heating is required
- any approval or certification the installation demands
- the mounting arrangement and cable or connector choice
- the interface and output the receiving system expects
If those match, the WindMaster RA provides that configuration.
QUESTIONS
Specification questions about the WindMaster RA
What wind speed range does the WindMaster RA cover?
The WindMaster RA measures 0 to 50 m/s.
What is the difference between the WindMaster RA and the WindMaster Pro?
The WindMaster RA has a right-angled head in aluminium and carbon fibre, outputs at 20 Hz with a 32 Hz option and measures up to 50 m/s. The WindMaster Pro is stainless steel, outputs at 32 Hz and measures up to 65 m/s.
How many axes does the WindMaster RA measure?
The WindMaster RA measures 3-axis, u, v and w.
What output rate does the WindMaster RA provide?
The WindMaster RA outputs at 20 Hz, 32 Hz option.
What outputs does the WindMaster RA provide?
The WindMaster RA provides 12-bit digital, with a 14-bit digital or analogue output option.
What temperature range does the WindMaster RA operate over?
The WindMaster RA operates from -40 °C to +70 °C.
What ingress protection does the WindMaster RA have?
The WindMaster RA is sealed to IP65.
What is the WindMaster RA made from?
Aluminium and carbon fibre.
Have an application to discuss?
Speak to our team
Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.
Enquiring about WindMaster RA
- Our team replies. Not an account manager, and not a queue.
- We aim to respond in one working day. Monday to Friday.
- No obligation. Plenty of these end with us saying it is not our product.