Wind speed and direction
2-axis ultrasonic anemometers. No moving parts.
WindSonicChoose for high volume, OEM integration and lowest costWindSonic 60, 75, M, SDI-12
WindUltraChoose for small, light and mobile platforms: UAV and USVCompact 2-axis
WindObserverChoose for marine approvals, airports and hazardous areasWindObserver 65, 70, 75, 90, ISNot sure which?Wind sensor finderAnswer a few questions about your site and we suggest the right 2-axis model.Start the finder ›Need 3D wind or turbulence?
Weather stations
Multi-parameter stations with ultrasonic wind.
MaxiMetChoose for one compact unit, including WBGT heat stress modelsGMX200 to GMX600
MetConnectChoose for separable sensors at different heights and WMO sitingMetConnect One, THPNot sure which?Weather station finderPick the parameters you need and we match the station.Start the finder ›Adding rainfall?
Rainfall
Solid-state optical precipitation sensing.
3D wind and turbulence
3-axis ultrasonic anemometers for flux, turbulence and air flow.
WindMasterChoose for general 3D measurement, site survey and ventilation controlWindMaster, Pro, RA, HS
Research rangeChoose for eddy covariance and high-rate atmospheric scienceR3-50, R3-100, HS-50, HS-100Not sure which?3-axis anemometer finderTell us the output rate and application and we suggest the model.Start the finder ›Displays
Live readouts for Gill wind and level sensors.
Liquid level
Capacitive level sensing with no moving parts.
LevelLiteChoose for weight-critical platforms such as UAVsLevelLite range
LevelProChoose for robust, general-purpose fuel and fluid levelLevelPro range
LevelSlickChoose for dirty, viscous or corrosive liquidsLevelSlick range
LevelDefendChoose for defence vehicles and military marineLevelDefend range
Catch tankChoose for endurance motorsport oil catch tanks1804-00-020Position
Non-contact linear and rotary position sensors.
Oil condition
Spot wear before it becomes failure.
Gas engine controls
Ignition and air/fuel control for gas engines.
Marine and offshore
Applications and the sensors used in marine and offshore.
Renewable energy
Applications and the sensors used in renewable energy.
Aviation and airports
Applications and the sensors used in aviation and airports.
Transport and infrastructure
Applications and the sensors used in transport and infrastructure.
Research and environment
Applications and the sensors used in research and environment.
Agriculture
Applications and the sensors used in agriculture.
Cities and buildings
Applications and the sensors used in cities and buildings.
Defence and security
Applications and the sensors used in defence and security.
Government and emergency
Applications and the sensors used in government and emergency.
Industrial and process
Applications and the sensors used in industrial and process.
Mining, quarrying and cement
Applications and the sensors used in mining, quarrying and cement.
Motorsport and high performance
Applications and the sensors used in motorsport and high performance.
Off-highway and construction
Applications and the sensors used in off-highway and construction.
Rail and rolling stock
Applications and the sensors used in rail and rolling stock.
Calibrate an instrument
UKAS-accredited calibration across six parameters, any manufacturer.
Service or repair
Keep instruments in service.
Solve a measurement problem
Common problems and how to solve them.
Read and download
Long-form material to take away.
Understand the basics
How the measurement works.
Find a document
Every document, never behind a form.
Something is not working
Get an instrument back in service.
Local and ongoing support
Support near you and keeping instruments current.
Manual
A short how-to on setting up two-point (high and low) switching from an open collector output.
Contents
Keep exploring
Have an application to discuss?
Tell us what you need to measure, where and under what conditions. We’ll help you work out the appropriate approach.
